Myalarm V-LCD1 Manual de Instruções descarregar pdf (Página 233)

PC/VDT PROGRAMMING - BATCH ENROLL DATA CHIPS

9-227

System 2 Installation / Programming Manual

Batch Enrolling Data Chips

System Status

When this Option is entered, you will be told how many user slots are enrolled and how many

users are available for programming:

Users Enrolled 0000

Users Remaining 0413

1=Yes,2=No

Want to Continue? [1]

User Number

The first thing to do is enter a user number. This number uniquely identifies a user and can be

thought of as an employee number. When the user enters a code and/or Card, and this event is

printed or displayed on the VDT, it is not the code number that is displayed to identify the user

but the user number. This is for two reasons. First, if Keypads are used, it would be a breach

of security to print a user's code where unauthorized individuals may eventually see it. Second,

when using Cards or Data Chips, this number may be quite long, and take too much space to

print or display. At this point we will enter the starting user number. This will be the user

number that is assigned to the first user in the batch. The System will sequentially add to this

number for each user in the batch. For example, if user number 1 is selected and the Number

of Users is 20, user numbers will be 1 - 20.

The VDT will display the instructions:

Use Up to 4 Digits

0=Quit

First User # [____]

At the First User # [_ _ _ _] prompt, enter the desired number and ENTER.

Number of Users

Here you will specify the number of users you want to automatically Batch Load.

The VDT will display the instructions:

Use Up to 4 Digits

0=Quit

Number of Users [____]

At the Number of Users [_ _ _ _] prompt, enter the desired number and ENTER.

1 2 ... 228 229 230 231 232 233 234 235 236 237 238 ... 335 336

Sem comentários

Myalarm V-LCD1 Manual de Instruções Página 233