Myalarm V-LCD1 Manual de Instruções descarregar pdf (Página 190)

100

101

PC/VDT PROGRAMMING - PORT CONFIGURATION

9-184

System 2 Installation / Programming Manual

Note: Although the display states the Option is Not Active, the second door can be set-up. However, it

will not be activated unless the 2nd Door Option has been turned ON. Proceed to Option #13 to turn

this Option ON.

The unit assigns the programmed information to the second door for those customers who wish to add the

second door in the future, but do not wish to re-program this option.

Selecting the Port to Program

The VDT will display the following instructions:

Use 01 thru 16

0=Quit

Enter Port # [0]

At the Enter Port # [0] prompt, enter the Port you want to work on and ENTER.

Note: If you have set-up the System for Networking, the number of ports available is 16.

If you select Port #2 and you have not purchased the 2nd door the VDT will display:

Option Not Active

Press Any Key

This same prompt will appear if you try to program any other ports which you have not

activated (Ports 3 - 16). You will need to purchase the Network Option (refer to Option #13)

to enable any doors beyond two.

1 2 ... 185 186 187 188 189 190 191 192 193 194 195 ... 335 336

Comentários a estes Manuais

Sem comentários

Myalarm V-LCD1 Manual de Instruções Página 190

Comentários a estes Manuais

Manuais e produtos relacionados com Sistemas de segurança - controlo de acesso Myalarm V-LCD1