Myalarm V-LCD1 Manual de Instruções descarregar pdf (Página 215)

PC/VDT PROGRAMMING - ADD/CHANGE DATA CHIPS

9-209

System 2 Installation / Programming Manual

Door Schedules

As we discussed in the schedule section of this manual, schedules can be used to restrict the

access of users. You may, for example, want a user to be able to access the front door from

08:00 to 18:00, and access the back door from 17:00 to 23:00. On the other hand, you might

want a user to have 24-hour access to both doors. This is where you specify what you want.

The VDT will display the instructions

Use 0 thru 8

0=None

Door 01 Schedule [_0]

Note: If you have a two-door System 2 (2016) , the amount of schedules available is 16.

At the Door 01 Schedule [_0] prompt, specify the schedule number, if desired.

Entering a 0 means that this user will have 24-hour access to the door.

Example: If you programmed Schedule #1 - Cell #1 for an ON Time of 08:00 MTWTF and

Schedule #1 - Cell #2 an OFF Time of 18:00 MTWTF, and you assign Schedule #1 to this user,

access will be granted at 8:00 AM Monday - Friday and denied after 6:00 PM (18:00) Monday -

Friday. Any attempt to enter any other time will result in an invalid entry.

If Schedule #1 also has holidays programmed into it, the person will be granted or denied

access during the holiday dates. This depends on whether the Holiday was programmed for ON

or OFF.

If you have multiple doors programmed for this user to access, simply repeat this process, when

prompted, for these doors. You will only be prompted for additional doors if this user has been

granted access to additional doors.

Use 0 thru 8

Door 02 Schedule [_0]

Simply repeat this process, when prompted, for additional doors. If you only have a one door

System 2, you are finished entering this user.

If you have a multi-door System 2, and have purchase the Anti-Passback Premium Option, you

can now program the Anti-Passback.

Note: Cells must be programmed in a distinct order. Cell 1 must be programmed before Cell 2,

Cell 3 must be programmed before Cell 4, etc.

Anti-Passback

(You may not be permitted to program Anti-Passback).

To activate Anti-Passback, Door 2 must be installed. Refer to Option #13.

Anti-Passback is a powerful, but perhaps a little confusing, security tool. Before you program

a user for Anti-Passback, refer to Option #7, where this is discussed in detail. The VDT will

display:

1=Yes,2=No

Enter Anti-Passback

At the Enter Anti-Passback [2] prompt, pick the desired type then press ENTER.

1 2 ... 210 211 212 213 214 215 216 217 218 219 220 ... 335 336

Sem comentários

Myalarm V-LCD1 Manual de Instruções Página 215