Myalarm V-LCD1 Manual de Instruções descarregar pdf (Página 146)

LCD PROGRAMMING - REPORTS

8-140

System 2 Installation / Programming Manual

1=Users þþþþ

Select Report [ _ ]

Reports (Option #11)

In this option, you can list Users, Events, Port Configurations and Time Schedules.

If your system is set up for networking (three or more doors) you will need a printer, Video

Display Terminal or PC to list any reports. If you attempt to list reports on the LCD and your

system is set-up for networking, you will return to the main menu.

The prompts for the first report “Users” vary depending if your system is configured as

networking or stand-alone. So, to make this option easier to understand, it has been divided into

two sections - Stand-alone and Networking. Please follow the programming instructions under

the section your unit is configured.

If your system is configured as a stand-alone unit (one or two doors) please follow the

programming information below. If your system is configured as a “networking” system please

skip to the programming information under Network Mode.

The LCD will scroll the instruction:

Scrolling Options: 2=Events

3=Configuration

4=Schedule

0=Quit

At the Select Report [ _ ] prompt, enter the desired report followed by a # (enter).

We’ll take a look at each report in order. You can skip to the report you have selected.

User Report in Stand-Alone Mode

In this option, you can send a list of all users to either the printer or the LCD. If you are using a

Video Display Terminal (VDT) or PC select Printer/VDT to list the users on your screen.

Be sure to “List Users” using a printer after you have all your codes / cards into the System.

This will give you a “hard-copy” of all user codes. If you are using Data Chips, and you ever

have to re-enter the Data Chip code, and you do not have them “in-hand”, you must have the

full 16-digit code. This code will print when you List Users.

Since the code has alphanumeric characters a PC or VDT is also needed to re-enter Data

Chips.

1 2 ... 141 142 143 144 145 146 147 148 149 150 151 ... 335 336

Sem comentários

Myalarm V-LCD1 Manual de Instruções Página 146